How we got here

Posted October 02, 2018 07:52:56 In October 2018, the California Supreme Court ruled that the state’s marijuana industry can now begin to sell recreational pot, as long as there are no restrictions on what kinds of pot can be sold. 

This ruling is a major victory for California’s legalization movement and means that marijuana businesses in the state can sell their products legally. 

The court also recognized that it is still illegal under federal law to sell marijuana in public, which means that the industry cannot operate without being subject to a federal prohibition. 

In a statement, the attorney general of California, Xavier Becerra, called the ruling “a significant victory for the California marijuana industry and for the nation as a whole.”

“The Supreme Court’s decision is a significant victory in ensuring that the California Marijuana Industry, like other businesses, will be allowed to sell their product without having to comply with federal law,” Becerrra said in a statement.

“It is a clear signal that the states with the most comprehensive and comprehensive cannabis policies can continue to grow and thrive while maintaining the safety and health of our communities.”

The ruling came on the heels of another Supreme Court decision last week that struck down the federal ban on the production, distribution, and possession of marijuana in states with legalized recreational marijuana. 

California is one of the 13 states that have legalized recreational cannabis.

Read more about marijuana legalization here: Posted October 02.

2018 09:42:08 Here are some of the most interesting headlines from the day in California:California’s marijuana growers are celebrating the new ruling.

The Associated Press reports that growers of marijuana have been celebrating the ruling.

The ruling allows them to start their own businesses, which would be subject to federal rules, said Steve Golin, the executive director of the Growers and Merchants Association of California.

“It was a huge victory for us, we were very excited about it, and we are looking forward to having the opportunity to work with the state government on how we can grow our industry,” Golin said.

The AP reports that some growers are planning to begin selling products in a couple of weeks.

California lawmakers are still deciding what to do with the marijuana industry after the Supreme Court made its ruling.

How to make your own remote-controlled robot

article Posted February 24, 2018 05:59:51 How do you make your very own remote controlled robot?

There are many different ways to do this, and some are really easy and cheap to do.

You can buy a robot that you can operate yourself.

Or you can buy an Arduino compatible robot that’s made by a robot company that specializes in making robots.

You also have a lot of other options, like buying a 3D printer that can make robots.

All of these options are great if you have a robotics-focused hobbyist like myself.

But it’s still really important to have some basic knowledge of robotics, and that’s why I’ll be covering a few tips and tricks for creating your very first remote controlled robotic.

You probably already have some experience with robotics, so I’ll cover a few common tasks you may want to consider before diving into how to create your very very own.

Let’s get started!


Design your robot with a minimum of screws and nuts.

It’s not worth spending a lot to get everything right.

Just don’t get too crazy about it.

For this tutorial, I’m going to stick to basic parts, but if you’re thinking about creating your own robot, you can always make it easier by choosing parts with fewer screws and more nuts.

Just be sure to get a quality set of screws.


Get the right type of screws for your robot.

Some robots will need screws for just about everything, and you can get them from a variety of sources, including the hardware store.

The main thing you need to get right is that the screw should be strong enough to hold a 2.5mm to 3mm bolt in place.

The higher the strength, the better.


Find the right size screwdriver.

The right tool is critical for your project, and finding the right screwdriver for your particular needs can be difficult.

There are two types of screws that you should be looking for: threaded and hexagonal.

The threaded type are the kind you typically see on screws and bolts that hold in things like bolts and nuts, and are usually longer than the hexagonal type.

Hexagonal screws are usually more expensive than threaded ones, so you may need to budget a bit more to get the right tools for your needs.

But the main thing to remember is that hexagonal screws will last longer than threaded screws, so it’s worth investing in one that’s long enough to last.


Find a good soldering iron.

Soldering iron is a versatile tool, but it can also be expensive.

That’s where a good, inexpensive, quality soldering irons comes in.

They’re usually made from a metal or plastic that’s well-polished, but don’t have to be.

And they usually come with an included holder that can hold up to a 1.5″ diameter iron.


Find an angle grinder.

You might be surprised at how many people make this mistake.

Some people use angle grinders to make tools.

They aren’t always a good choice for the project, but they can be a very handy tool if you need a few extra tools in the future.


Find something to hold your screws.

The best tool you can use to make the screws are actually just a couple of pieces of wood, but that doesn’t mean they can’t be used to make other tools.

I use an old kitchen drawer, which is perfect for making small screws and other tools, but you can make them out of scrap wood.

Just make sure to find something sturdy enough to grip a small, 1.25″ diameter bolt.


Drill holes.

If you’re looking to build your robot, drilling holes is one of the best ways to get some of the screws you need out of the way.

For a few reasons, this is a great method for making smaller, simple parts.

For example, you don’t need to drill holes in the top of the robot for the power cable, since you’ll only need to take out the power switch.

Also, it’s much easier to find a nice spot to drill a small hole.


Make sure the screw is securely fastened to the robot.

This can be tricky to do because the screws on the robot will likely be pretty loose.

The easiest way to secure a screw to the top is to use a nut.

I usually use the Phillips head on a wrench, but there are a few other tools you can try.

The bolt will probably be on a flat surface, so using a screwdriver or a pliers is usually the best way to get it in the right place.


Drill the hole.

Once you’ve got the screw secured, you’ll need to make sure that it’s secure enough to allow the screw to be unscrewed from the robot before you start working.

This is tricky because there’s a lot going on inside the robot, so a few things

How to prepare for a crisis

A $1.3 trillion software development and deployment system has the potential to destabilize the entire global economy and threaten the survival of the planet, the head of the World Bank has warned.

The Global Development Association has issued a report on how the financial system is poised to become more and more vulnerable to cyber attacks and financial shocks.

Developers have already been warned that a number of major IT systems are vulnerable to attacks and could be at risk, including those in the banking system, financial systems, the health care sector and other large-scale industries, said David Sperling, president and CEO of the association, in an interview with Reuters.

In the event of an attack, the system would be unable to perform functions and would be rendered completely useless, Sperlin said.

Sperling was speaking at the Global Development Summit, a gathering of world leaders from the World Economic Forum and other international organizations.

For the first time, the association has warned of the potential dangers of such systems and the ways they could be used to harm the global economy.

“We’ve got to be very aware of the systems that we have at our disposal and also how vulnerable they are to attack,” he said.

“We need to be able to respond, and the response should be robust and responsive,” he added.

With the U.S. poised to enact a cybersecurity law and a number in Europe to regulate banks, it is becoming increasingly difficult for financial institutions to manage their risk and remain resilient in a crisis, said Sperlng.

Financial institutions need to develop a “strategy for resilience” to keep their business going, he said, and a “cyber-security culture” must be developed and implemented in their operations to protect their systems and to mitigate the risks of attack.

It is crucial for the U